Search results

Looks right, thanks

Looks like it should be right when I get the old one off I will know for sure. Do you think CDI are ok or should I get original OMC.

Wondering how much a stator would be for a 1994' 150 HP Evinrude Ocean Pro? Thanks:head:

Thanx guys

yeah I was going to check the stator in the spring, I need to get a puller from somewhere. As far as the lower, it could be, the end of the screw is always perfect, no shavings. What makes me wonder is, when I purchased the engine, the mechanic AKA ( *#+hole) told me that he used a lower from a...

I was wondering if anyone knows about how much it would cost to have my engine tore down to determine a chatter I have had in my engine ( sounds like a lifter tap on a car ) Engine was only rebuilt three seasons ago, I suspect that my VRO was not supplying proper oil for two seasons, finally...

internal knock ? I think I have determined my noisy rattle, I finally got up the nerve to rev the engine up to 3500 in nuetral to see if I heard the noise, and yes I did, I am really afraid now that it is internal and not something loose while underway. I think it may always be making the noise...

Hey guys I recently got rid of my VRO tank and went to mixing oil into the gas. Everything is fine except when I go to use the boat after e few days to a week of not using it, it is hard to start the first time. It takes about 10-15 cranks to get it going, when it starts there is a fair amount...

Thanks, I got it, I will let you know how I like it.

Those are some good things to check, I already took out the trim rod last year as it was rattling all around. I would not be surprised if things like rubber gaskets or rings were missing, the guy who put it together was less than stellar. Is the torque tab the little rutter like dial on the...

Yeah reel I will check that thanks, It sounds like it is lower, even without the cover on I put my head right next to the motor and I only hear it down low, not by the engine, seems like it is coming from the lower it is hard to tell. Remember from past posts this lower unit (96') was put...

Thanks, a little too far for me seeing as I don't have a trailer. I usually have to borrow one to bring it to a mechanic, ( only once so far ), I know, I know I really need a trailer, I'm working on it.

Took it for a ride today, noise sill there only between 3,00 - 4,000, could it be a knock in the engine due to lack of proper oil ( I hope not ) what confuses me is that I only hear it in this RPM range, if it was a knock wouldn't I hear it all the time? I still haven't checked my lower unit oil...

Disconnected the VRO today, found the white wire of the two wires coming from the top of the tank not connected inside the engine compartment, wondering if VRO was even working, could it be that the oil was just getting to the engine by syphon? maybe that is why my tank was emptying so slow...

Spoke to my mechanic, told him I have a rattling noise only between 3,000 - 4,000 RPM's he told me to add oil to my gas 50:1 just to see if the rattling noise goes away ( in case VRO isn't working ), then check to see if there is water in the lower unit oil. If not then he will look at it. ( I...

Spoke to my mechanic, told him I have a rattling noise only between 3,000 - 4,000 RPM's he told me to add oil to my gas 50:1 just to see if the rattling noise goes away ( in case VRO isn't working ), then check to see if there is water in the lower unit oil. If not then he will look at it. ( I...

Any reviews on a Mark-4 Chartplotter/Fishfinder ?

Yes Normally I do, at the end of last year I filled both tanks with hight test, and startron addative. Have only added 89 octane so far this year, my regular fill station has been closed every time I went. It will be high test for the rest of the season.

that's pretty close, my two gallon reservoir is a little more than half full, I used about 40 gallons so far this year, I started with a full reservoir. Thx Any thoughts on getting rid of the VRO ?

I was wondering any opinions on two things. How does this gas consumption sound -- 20 minutes (no wake) each way in and out of channel, 3 hrs nonstop tubing with 5 kids 2 adults, food, drinks, ( got 5400 RPM's ) gear put in 11 gallons before trip 89 octane. Fuel gauges were right back where I...