Search results

Does anyone have an inexpensvive home made way to create and attach the upright pvc boat guides? I hate to spend $70.00 for Overtons angle iron and u-bolts. Thanks

What pics do you want? My bloody nose? How about a recording to 911 about a possible boat retreival heart attack?

You're right. I'm not drilling the transom. It's the top of the dash to mount accessories. I ended up using stainless coax cable "clams". they have a rubber gland that tightens around the wire. It works to use it for other wire also. Just put some silicone if it's not a real tight seal. Looks...

You're right. I'm not drilling the transom. It's the top of the dash to mount accessories. I ended up using stainless coax cable "clams". they have a rubber gland that tightens around the wire. It works to use it for other wire also. Just put some silicone if it's not a real tight seal. Looks...

Launched the newly acquired V-20 for the first time Saturday at high tide and high nervousness. Normally there isn't any other boats using the little out of the way neighbor hood ramp, but of course as soon as we dipped the trailer into the water, two trucks with boats pulled up and backed into...

I sure I installed the bracket and sounder in the right place, but I'm getting a vertical roostertail right at the transom and about 6" taller than the transom. Should front of the transducer be adjusted downwards? Thanks

When feeding wires and cable through newly drilled fiberglass holes, what kind of bushing could I use to protect the wire jackets from cutting and chaffing? thanks

When feeding wires and cable through newly drilled fiberglass holes, what kind of bushing could I use to protect the wire jackets from cutting and chaffing? thanks

No kidding? A crummy wooden board screwed against the fiberglass with black magic marker hand writing?. I doubt the factory did that.

No kidding? A crummy wooden board screwed against the fiberglass with black magic marker hand writing?. I doubt the factory did that.

Just located a cobbled-up, mickey mouse fuse panel installed under the dash in the enclosed storage tray. Really appaling wiring job. Where was the factory fuse panel when new? Thanks

Just located a cobbled-up, mickey mouse fuse panel installed under the dash in the enclosed storage tray. Really appaling wiring job. Where was the factory fuse panel when new? Thanks

I just mounted a sounder. How do I fish the wire from the stern to the center consol? There appears to be two passage ways in the hull. One is wiring, and the other is steering. Thanks

I just mounted a sounder. How do I fish the wire from the stern to the center consol? There appears to be two passage ways in the hull. One is wiring, and the other is steering. Thanks

Is there such a thing?