Search results

More pics.... More pics of work done to boat..

Getting close to done....more pics. Here are some more pics....

More pictures... What do you think....

Got the seats done.... Just have sanding left and gel-coat

Getting closer.. Got more done to the forward seating areas and the under console storage, and the storage under the bow area....

The new plywood i installed was coated in two coats of resin and glass, the top side was coated in three coats of resin and two layers of chop glass. The bottom skin was cracked in so many places I opted to just remove the whole thing and left a two inch edge to reattach the new floor to.....it...

here is a pic to better show you what my top is...

I rolled it on....

Its an aluminum hard top that was added before I bought the boat.

The finished product.... Sorry its been so long since my last reply....had a illness in my family to take care of first...but here is the pics of the outcome of my boat and I want to thank everyone of you for your much needed help with this project...

Things are getting better Got the first coat of get coat in this evening.....next coat tomorrow with the sand in it for a non-skid service...

More pictures... Its getting very close to being done....

Hey Destroyer, have a Q for you....when you installed the new floor did you leave a ledge around the outside edge of the floor bottom? and did you lay your wood on top of that edge and fasten down? I guess what I'm asking is how did you attach it down? I have my own ideas but wanted your advice....

Well, it turned out better then I thought after I got the fuel tank removed, only one spot on the keel board about six inches long and maybe 1/8 inch deep into the board....scraped all that off and ready for new glass.... Hey Destroyer, have a Q for you....when you installed the new floor did...

That looks fantastic....need to do mine...or just turn that area into something else entirely....thinking outside the box..

The keel board down the middle of the hull.....

Need your help please.. Ok...here are some pics......ran into a issue that I need advice on, under the fuel tank I found that the fiberglass covering the spine was very flexible I opened up a small hole to look at it, there is moisture in there and the wood is soft on the top side. I checked...

Just bought a 1978 V-20, inline 250/6cyl. with some soft spots on the floor, I will be cutting it out and replacing it. I will take lots of before/during/after pictures to share with everyone. I'm new to this forum but looking forward to being part of it.