spareparts's latest activity

Job Done! (Just some switches left). Turned out pretty good.

A couple of years ago, one winter. we had giant bluefin jumping in 20 ft of water off N Topsail,people were taking pics from their...

saw a big splash once near Geeorgtown SC, pointed it out to our guide, few minutes later, we saw it again, ended up being a White...

Me and my son went fishing in raritan bay in nj. And 5he fishing was not to good. But there is always a but when we were going out my...

anytime you guys are using a hole saw in fiberglass, drill the pilot hole separately, then spin the hole saw backwards, it takes a bit...

I've worked on several windlass setups on various large boats. It's very common to see regular pvc tubing used for routing you're anchor...

I just wanted to stop by and wish everyone a Happy father's day!!!! Again, ill always be grateful for all the love you have all shared...

Yeah, I squirted Boeshield into my ratcheting screwdriver mechanism a gummed it up so badly I had to take it apart to clean it out and...

Crc used to have corrosion guard that sounds very similar to what you're talking about. Looked like spray on cosmoline, very sticky. I...

I lost a lot of personal issues with my ex over 25 years, I got most of it back after the divorce,

gear ratios varym quick google search says 2/1 or 2.4 to 1. Your old school 150 would have been 1.87 or 2.00. Its goinf to take a little...

get the prop size, if its close, go for a ride with him and make sure he understands trim. Does it have bottom paint? Any growth on the...

4k rpms is around cruise speed on 4 stroke. Wrong prop as you suggested, or, if it had been running faster, it could be a number of...

I pretty much only use WD-40 for loosening things up or flushing rust out, then blow it out with air and use whatever lube I think is...

Thanks Blue, it is really nice up here. Its so peaceful and quiet here. The air is so crisp and clean. If you've never been up here you...