Recent content by RIBoater

I was wondering if I could get some of your opinions. I'm thinking about selling my V-20 but really don't know what it would probably sell for. It's an '89 in good shape with normal wear. It has new rod holder inserts, a new 60 gallon fuel tank and all new hoses, vents, fill nozzles, etc. It...

It looks like I'm going to have to pull a good sized piece of my floor to repair some soft spots. It has soft spots and crazed areas that I'd like to take care of. I had Durabak send me a chip and it just sems a little too rough for my liking. It seems like it would be rough on the feet and a...

I have soft spots in my floor on both sides of my center tank. When I did the tank I also noticed that the foam was water logged under some of the floor. I'm hoping you guys can let me know if my plan sounds like it will work. I'm planning to cut around the edges of the floor close (1" ???)...

I am in the process of replacing basically my entire fuel system. I was able to find an almost exact replacement for the original aluminum tank in my '89 Wellcraft V20 Steplift. The only difference was that my old tank had 2 grounding tabs - 1 near the fuel fill at the front of the tank and 1...

OK.. I have the new tank for my '89 V. I was fortunate to find the original manufacturer in Perry, FL. They shipped an original replacement they had in stock for a very reasonable price. I have the new hoses (fill, vent and feed), the new thru-hull vent, new deck fill, sending unit and gauge...

Hi All, I have an '89 V20. Last year my fuel tank developed a leak near the sending unit. The sticker I was able to get through the inspection port was mostly destroyed and only shows that it is an aluminum tank manufactured by a company in Perry, FL. I can't read the company name. Does...

:-XWell I bought a new trailer for my '89 Cuddy. I bought a Tidewater, which was apparently started by the guy who started LoadRite. I saw it yesterday but I pick it up on Monday. It's a 4 bunk model (I don't like rollers) rated for 4700#. It's got tandem axles, torsion axles and Kodiak brakes...

Hey Guys, I'm wanting to replace the port jump seat in my V-20 Cuddy with a tackle station. Any ideas? I also want to replace my rod holder inserts. Any word on the ones available from Flounder Pounder? Thanks, RIBoater

Hey folks, This is my first post so please forgive any newbie moves. I have a 1989 V-20 with a Suzuki 140 4-Stroke, I need to buy a new trailer kind of pronto. A local dealer has a Long trailer, tandem axle, stainless brakes on both axles, stainless leaf springs, 4600# capacity, bunk trailer...