phatdaddy's latest activity

  • phatdaddy
    phatdaddy replied to the thread Took her to the shop today.
    I hope it fixes your issue, if so, it was worth it. I had Merc 150 2S from 91 -95, came with my 83 V. Then 95-2015, i replaced with a...
  • phatdaddy
    phatdaddy replied to the thread Took her to the shop today.
    IF that’s all they do, shouldn’t take more than a half hour. Diaphragm kit USED to be about $15.00. I am constantly surprised at what...
  • phatdaddy
    phatdaddy replied to the thread Took her to the shop today.
    It’s been 10 years since i worked on my 150 2S, but that was a pretty easy one to service. I always knew mine was getting weak when...
  • phatdaddy
    phatdaddy replied to the thread Gas prices.
    $2.60 85 ethanol $3.41 93 Non-E here yesterday
  • phatdaddy
    phatdaddy replied to the thread Top Cap and Hull Compatability.
    The biggest difference I’ve seen in the caddy’s is the tank location. Mine is an 84 and tank is all the aft against the splashwell...
  • phatdaddy
    phatdaddy replied to the thread Top Cap and Hull Compatability.
    Stringers are “glass encapsulated’’ with a wood core.
  • phatdaddy
    phatdaddy replied to the thread Gas prices.
    Went down here, but always does after Labor Day
  • phatdaddy
    phatdaddy replied to the thread Top Cap and Hull Compatability.
    That’s a lot of work ,seems like locating another center console would be a better option. Since it is a CC, can’t u remove the...
  • phatdaddy
    phatdaddy replied to the thread Well…. I’m done! Retired!.
    Good for you. Been kinda wondering where u were. Come on down but don’t complain about the bugs,the heat, the traffic,the prices, the...
  • phatdaddy
    Sounds like the vent hose for the tank.
  • phatdaddy
    phatdaddy replied to the thread Hard starting.
    U sure it has a butterfly choke or an enricher? My 84 150 was tricky to start. U raising the throttle advance bout half way? With the...
  • phatdaddy
    phatdaddy replied to the thread Steering tube.
    Is the steering cable still in the tube? Can u hold the starboard side with a crescent wrench while turning the port side. I have...
  • phatdaddy
    phatdaddy replied to the thread Carb rebuilt.
    Know your pain,Oteps. I was working on carbs from my Tohatsu bout a month ago, i had 2 pair of 3X readers stacked on my nose looking at...
  • phatdaddy
    phatdaddy replied to the thread Carb rebuilt.
    YouTube is very helpful in a situation like this. Also a service manual made by Mercury for your specific OB.
  • phatdaddy
    phatdaddy replied to the thread Wiring.
    https://newboatbuilders.com/images/circuit6.jpg This one is pretty generic, First one i found using search Some one has a black and...
Back
Top