Prev
I left the bottom skin intact and cut out the top skin and the wet/rotten wood. After glassing in new wood, I glassed the top skin back on, using bri
Next
Prev
The deck looks good after 3 coats of Perfection
After a little grinding, glassing, sanding, glassing, and sanding the floor is pretty smooth. Painting the floors will probably be one of the last ta
The bricks did the trick. The floor is solid.
I left the bottom skin intact and cut out the top skin and the wet/rotten wood. After glassing in new wood, I glassed the top skin back on, using bri
Had to cut a little more floor.
Cut out the floor under the captains chair for reinforcement. I'm not ready to take on the entire floor and this was the only place it was really sof
gelcoat repairs
Next
awthacker

I left the bottom skin intact and cut out the top skin and the wet/rotten wood. After glassing in new wood, I glassed the top skin back on, using bri

  • Media owner awthacker
  • Date added
There are no comments to display.

Media information

Album
Aaron's '82 V20 Cuddy
Added by
awthacker
Date added
View count
1
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top